The Luft Gas Flow Analyzer And Ventilator Tester is perfect for testing ventilators and anesthesia machines, where information must be accurate. It has a bi-directional heated filament flow sensor. It simultaneously measures 19 parameters derived from Flow, Pressure and Volume.
Geral | |
Operating Temperature | 10 °C a 40 °C (50 °F to 104 °F) |
Storage temperature | -20 °C to +60 °C (-4 °F to +140 °F) |
Humidity | 10 % a 90 % non-condensing |
Dimensions | (L)261mm x (H)212mm x (W)88mm |
Display | 7 Polegadas |
Communications | Wifi e Bluetooth |
Battery Charger | 100 – 240 V 50/60 Hz |
Battery | 12V e 6,6 Ah (duration of 8 hours, according to the mode of use) |
Weight | 2 Kg |
Ground Resistance | |
Range | 0.1 Ω a 10.0 Ω |
T olerance | ± 1% + 0.5 ohm |
Insulation Test | |
Range | 0 MΩ a 200 MΩ (applied voltage – 500VDC) |
Leakage Current | |
Range – Tolerance | • 0μA – 500μA (DC a 1kHz – ± 1%) • 500μA – 1mA (1kHz a 100kHz – ± 2,5%) • 1mA – 2mA (100kHz a 1MHz – ± 5%) • 2mA – 12mA (100kHz a 1MHz – ± 5%) |
Functional Current | |
Range | 0.1 A a 15.0A* |
Tolerance | ± 5% |
Network Voltage | |
Range | 100 a 240V RMS |
Tolerance | ± 1% |
Apparent Power | |
Range | 0.1 VA a 1920 VA |
Tolerance | ± 5% |
When purchasing an analyzer or simulator, you receive, at no additional cost, access to Arkmeds Lite.
A software designed for you to perform calibrations and reports quickly and easily. With Arkmeds Lite you perform tests, collect the signature and make the document available to your customer in a blink of an eye!
You’ll have access to maximum traceability, GPS coordinates and times spent in the tests, even without internet. App available for Android & IOS systems